customer drawing title: duraseal push-on receptacle unless otherwise specified dimensions are in millimeters.[inches dimensions are shown in brackets] raychem devices document no.: b-106-3xxx tolerances: 0.00 0.02 mm 0.0 0.2 mm 0 0.5 mm angles: 030? roughness in micron tyco electronics co rporation reserves the right to amend this drawing at any time. users should evaluate the suitability of the product for their application. rev: b date: december 7, 2011 prepared by: ynguyen cage code: 06090 eco number: eco-11-024145 scale: nts size: a sheet: 1 of 1 ? 2006-2011 tyco electronics corporation. all rights reserved. if this document is printed it becomes unc ontrolled. check for the latest revision. product dimensions wire dimensions ?g product name ?a min b nom c nom l max color (1) size range mm 2 (awg) min max b-106-3631 4.00 [0.160] 6.60 [0.260] 0.80 [0.030] 30.00 [1.180] red 0.5 - 1.0 (awg 22-18) 1.4 [0.055] 4.0 [0.160] b-106-3632 4.60 [0.180] 6.60 [0.260] 0.80 [0.030] 32.00 [1.260] blue 1.5 - 2.5 (awg 16-14) 2.0 [0.080] 4.6 [0.180] b-106-3633 6.50 [0.255] 6.60 [0.260] 0.80 [0.030] 33.00 [1.300] yellow 3.0 - 6.0 (awg 12-10) 2.8 [0.110] 6.5 [0.255] B-106-3481 4.00 [0.160] 5.05 [0.199] 0.80 [0.030] 30.00 [1.180] red 0.5 - 1.0 (awg 22-18) 1.4 [0.055] 4.0 [0.160] materials 1. insulation sleeve: heat-shrinkable, transparent color (1), radiation cross-linked modified polyamide with thermoplastic adhesive coating inside. 2. push-on terminal: tin-plated brass. base metal: c260 brass. plating: tin-plated per astm b545, class a. application 1. these controlled crimp devices are desi gned to terminate a tin-plated or bare c opper stranded wire having an insulation rate d for at least 75 ? c to a push-on terminal. it will provide a sp lash proof and strain relief connection. ul listed wire connector 3z11. 2. temperature range: -55 ? c to +125 ? c. 3. for application tooling and installation, see rpip-684-00. for best results, prepare the wire as shown:
|
